Ver ítem
- xmlui.general.dspace_homeDirección Nacional y DNAsSistemas de Información, Comunicación y CalidadGerencia de Comunicación e Imagen InstitucionalArtículos científicosxmlui.ArtifactBrowser.ItemViewer.trail
- Inicio
- Dirección Nacional y DNAs
- Sistemas de Información, Comunicación y Calidad
- Gerencia de Comunicación e Imagen Institucional
- Artículos científicos
- Ver ítem
Densificado higro-termo-mecánico de madera de Gyrocarpus americanus. Evaluación por ultrasonido.
Resumen
El aumento artificial de la densidad de la madera incrementa su resistencia mecánica y mejora sus propiedades higroscópicas. La investigación tuvo como objetivo densificar madera de G. americanus y evaluar el efecto del tratamiento en la densidad, la velocidad del ultrasonido y el módulo dinámico. Se realizaron pruebas de ultrasonido antes y después del tratamiento de densificado. Se diseñó un experimento de diferencias de medias entre las tres variables
[ver mas...]
El aumento artificial de la densidad de la madera incrementa su resistencia mecánica y mejora sus propiedades higroscópicas. La investigación tuvo como objetivo densificar madera de G. americanus y evaluar el efecto del tratamiento en la densidad, la velocidad del ultrasonido y el módulo dinámico. Se realizaron pruebas de ultrasonido antes y después del tratamiento de densificado. Se diseñó un experimento de diferencias de medias entre las tres variables de respuesta medidas antes y después del tratamiento. El tratamiento se consideró el factor de variación. Para evaluar el tratamiento de densificado se calcularon el coeficiente de densificado y los índices de densificado, elástico y de calidad. Sus magnitudes fueron próximas a las reportadas en la bibliografía. El tratamiento de densificado incrementó la densidad de la madera y su módulo dinámico. En cambio, el densificado no modificó la velocidad del ultrasonido. Si se aumenta la densidad de la madera artificialmente, se puede incrementar la magnitud del módulo dinámico, lo que probablemente valorice especies de baja densidad como lo es G. americanus.
[Cerrar]
The artificial increase of wood density augments its mechanical strength and improves its hygroscopic properties. The goal of the research was to densify Gyrocarpus americanus wood and to assess the effect of the higro-thermo-mechanical treatment in the wood density, the speed of ultrasound and the dynamic modulus. Ultrasound tests were performed before and after treatment densified. It was designed an experiment of differences of means between the
[ver mas...]
The artificial increase of wood density augments its mechanical strength and improves its hygroscopic properties. The goal of the research was to densify Gyrocarpus americanus wood and to assess the effect of the higro-thermo-mechanical treatment in the wood density, the speed of ultrasound and the dynamic modulus. Ultrasound tests were performed before and after treatment densified. It was designed an experiment of differences of means between the variables of response and the derivative, before and after treatment. The treatment was considered the variation factor. To assess the treatment of densification they were calculated the coefficient of densification, the elastic index, the index of densification and the index of quality. Their magnitudes were close to those reported in the literature. The treatment increases the densified wood density and its dynamic module. Instead the densified does not change the speed of ultrasound. If the density of the wood is increased artificially, it can increase the magnitude of dynamic modulus, which probably valorize low density species as is G. americanus.
[Cerrar]

Autor
Sotomayor Castellanos, Javier Ramón;
Fuente
RIA 43 (2) : 156-164 (2017)
Fecha
2017-08
Editorial
Gerencia de Comunicación e Imagen Institucional, DNA SICC, INTA
ISSN
1669-2314
0325-8718
0325-8718
Formato
pdf
Tipo de documento
artículo
Palabras Claves
Derechos de acceso
Abierto
